Table of Contents
Advertisement
Element, these StudioEngine indicators show what is as-
signed in the Element web page shown above:
»
Engine's
Source Name
fields will display the
ber
here.
»
Engine's
field will be on or off depending
Enable
on whether you selected
VMIX faders here.
»
Engine's
field will display the number en-
Gain
tered into the
Fader Gain
About the Source Name drop down menu:
How does a source show up in this drop down
menu? It has to do with an option that appears
whenever you create a Source Profile. Remember
that there's a section of the Source Profile that
lets you choose what fader channels the source
may be assigned to, and whether it should be
available to the CR monitors, Studio Monitor, or
the ... here's the kicker... V-mixer input! Gosh!
Someone's been laying awake at night thinking
of all this stuff.
The
and
Up Time
Down Time
of time that control the rate at which the fader's audio
goes from
to
and visa versa. If the source is
OFF
ON
, gain is negative infinity (not adjustable, just a law
OFF
of nature).
When the source turns
audio adjusts from
to
OFF
earlier field) is the
Up Time.
Figure 6-3: Element VMix settings page
and
Channel Num-
you select
Source ID
or
for any of the
OFF
ON
fields here.
fields contain values
, the time in which the
ON
(the gain value set in the
ON
It the field is set to 1 sec-
©2008 Axia Audio — Rev. 3.0
finderPC is dynamically making changes to the VMIX
based on conditions met.
Other parameters in the Mixer setting are the
of the mix and the
Gain
Logic Port ID.
»
The
Master Gain
be applied to the final mix of the five Submixer
faders. Recall the indicator in the Engine HTTP
screen for the Gain of
sponds to this field. In most cases a gain of 0 is
appropriate.
Note: When controlling VMIX through Element,
you can set the gain of the eight Submixers, but
you cannot set the gain of the VMIX Main out-
put — that must be done from the StudioEngine
VMIX page.
»
The
Logic Port ID
mixer must have a unique channel number, like
any other system GPIO channel; this will provide
GPIO functionality to the Submixer. We suggest
you enter the same Channel number that you gave
to the Submix itself.
"Why would a VMIX Submixer need a GPIO func-
tion?" Remember, the GPIO of your Element is
grouped in fives: five INPUTS and five OUT-
PUTS. With this field assigned, a GPIO port or
GPIO device can be used to receive status, or
to command ON/OFF states of the five inputs in
ond, the audio will
"fade up" to the gain
value in 1 second.
If the field is set to
0, the audio will not
fade, but
simply
turn
at the gain
ON
value specified. The
second field controls
the
to
fade
ON
OFF
time.
This
function
can be used to create
crossfades between
sources when Path-
Master
field is a parameter that can
That corre-
VMIX SUB?
for a particular VMIX Sub-
Advertisement
Table of Contents
Need help?
Do you have a question about the Element and is the answer not in the manual?