Table of Contents
Advertisement
Figure 4-30: Monitor Options menu screen #2.
the
bus.
PGM-4
*
Follow Monitors
levels for any source assigned to
»
When the
Fader Options
pressing the
St. Mode
fader-normal and European-style fader-start
channel activation methods.
*
Selects the US method of re-
Fader Normal:
quiring talent to manually turn channels on
and off.
*
Selects the European conven-
Fader Start:
tion of activating the channel and associated
machine logic when the fader is raised from
∞.
*
Retain Source Setting:
fader uses the settings specified in its Source
Profile.
»
Element features four stereo
use as utility, FX or IFB buses. When the knobs
in the
Aux Send Masters
the
SEND A/B/C/D
settings for the master levels of the four
means the meter will show
Monitor 1.
box is highlighted,
SoftKnob selects between
Each individual
buses for
Aux Send
box are highlighted,
knob affects global gain
Aux
©2008 Axia Audio — Rev. 3.0
buses.
Send
*
The
Send A/B/C/D
tated, set the Master Send Gain for each
bus. Pushing the knob toggles the se-
Send
lected
Aux Send Master On
*
Pushing the
Preview
lighted
Aux Send
nel. Push to preview; release to end preview.
»
Element features two stereo
whose output can be applied to any of the four
buses. When the knobs in the
PGM
box are highlighted, the
fects global gain settings for the master levels of
the two
Aux Return
*
The
Return A/B
set the Master Send Gain for each
bus. Pushing the knob toggles the selected
Aux Return Master On
*
Rotate the adjacent
choose which of the four
the
bus) to assign the output of the
Preview
selected
Aux Return.
the assgnment.
»
Pressing the
Function/Exit
time returns you to Element's main meter screen.
•
Monitor 1 Knob + Source Keys
This knob, at the bottom left of the Monitor section,
controls the selection and volume of the source heard
in the
speakers (typically the Control Room
Monitor 1
monitors).
»
Rotate the knob to vary the gain of the
speakers.
1
»
Use the Direct Selection Keys in the column di-
rectly above the
Monitor 1
put of
Program 1 - Program 4
monitor sources to the Monitor 1 speakers.
ternal
These keys light to denote the selected source.
»
You can listen to any frequently-used audio
stream in your facility instantly (such as a net-
work feed, off-the-air monitor or another studio's
Program output) by assigning it to one of the two
SoftKnobs, when ro-
Aux
or
Off.
knob sends the high-
mix to the
chan-
Preview
buses
Aux Return
Aux Returns
knob af-
Return A/B
buses.
SoftKnobs, when rotated,
Aux Send
or
Off.
knob to
Assign/Take
buses (or
Program
Push the knob to
Take
SoftKnob at any
Monitor
knob to send the out-
or the two
Ex-
Advertisement
Table of Contents
