Table of Contents
Advertisement
rides the
Headphone Monitor
is sent to both the left and right channels of
the operator's headphones.
*
Audio from the
Split:
overrides the
Headphone Monitor
in the left headphone channel only. Program
audio is still present in the right channel of
the operator's headphones.
*
After making a selection, push the knob to
the new value.
Take
knob: Rotate to select from the fol-
MO MODE
»
lowing options.
*
The selected source will be present-
Stereo:
ed in stereo on the Monitor speakers.
*
The left channel of the selected source
Left:
will be presented in both Monitor speakers.
*
The right channel of the selected
Right:
source will be presented in both Monitor
speakers.
*
Both channels of the selected
Sum L+R:
source will be summed and presented to both
Monitor speakers.
After making a selection, push the knob to
the new value.
knob: Works like the
»
H/P MODE
knob described above, but affects the board op-
erator's
Headphone
or
Options
Options
•
Meter Options Key
Pressing this key opens the Meters screen, where
you can choose whether the far-right on-screen meter
bars will display levels for the
source feeding the
Monitor 1.
means the meter will be slaved to the
Dedicated
»
bus.
PGM-4
»
Follow Monitors
levels for any source assigned to
selection and
channel
Preview
selection
Take
MO MODE
channel. Pressing
Monitor
exits this menu.
bus or for the
PGM-4
means the meter will show
Monitor 1.
©2008 Axia Audio — Rev. 3.0
Figure 4-16: Aux Sends menu screen.
•
Sends & Returns Key
This key affects global settings for the master send
and return levels of the four stereo
stereo
buses. The outputs can be turned
Aux Return
or
and can be sent to the preview speakers and
On
Off
headphones (if preview is enabled in headphones).
Element's Aux buses can be used as utility buses for
mixing, for constructing custom IFB mixes, or as effects
buses for production. Pressing the
key once takes you to the
(Figure 4-16); pressing it twice displays the
screen (Figure 4-17), and pressing a third
turns Master
time exits the menu.
screen options:
Aux Sends Master
»
The
Send A/B/C/D
set the Master Send Gain for each
Pushing any of these knobs toggles that individu-
al
Aux Send Master On
»
The
Select/Preview
any of the four
Aux Send
channel. Push to preview; releasing to end the
preview.
and two
Aux Send
Sends & Returns
screen
Aux Sends Master
Aux Re-
SoftKnobs, when rotated,
bus.
Aux Send
or
Off.
knob allows you to hear
mixes in the
Preview
Advertisement
Table of Contents
