Table of Contents
Advertisement
plied to the selected band.
›
Note that when you adjust
Shelf/Peak indicator next to the onscreen
control automatically shifts to Peak mode
when boost is applied, and shifts to Shelf
mode when cut is applied.
›
Note that when you select the
label below the
or
Peak
Hi Shelf
mode has been selected. Push the knob to
toggle between the two modes.
*
The center SoftKnob is the
adjusts the center frequency of the selected
EQ band.
›
In
mode, rotating the knob ad-
Lo Freq
justs the center frequency of the low EQ
band (25 - 400 Hz).
›
In
mode, rotating the knob ad-
Mid Freq
justs the center frequency of the midrange
EQ band (100 Hz - 1 kHz).
›
In
mode, the knob adjusts the
Hi Gain
boost/cut of the high frequency band.
Pressing the center SoftKnob toggles EQ be-
tween
and
Active
Note: High, Mid and Low band adjustments
provide up to 25 dB of cut and 15 dB of boost.
Element EQ features SmartQ™ automatic band-
width system that varies the Q of the selected
parametric band to provide the most pleasing
EQ effect. For details on SmartQ, please refer
to Page 44 of this manual.
»
When the
Preview to Headphones
highlighted, the
HP Prev/Take
whether audio from the
board op's headphones, and if so, in what man-
ner. Rotating this knob selects from the following
options:
*
The operator will not hear Preview au-
Off:
dio in the headphone channel.
*
audio from the Preview channel over-
On:
rides the
Headphone Monitor
is sent to both the left and right channels of
the operator's headphones.
*
Audio from the
Split:
overrides the
Headphone Monitor
, the
Lo Gain
band, the
Hi
control displays
Gain
Hi
, depending on which
control and
Freq
Bypass.
box is
knob controls
bus is fed to the
Preview
selection and
channel
Preview
selection
©2008 Axia Audio — Rev. 3.0
in the left headphone channel only. Program
audio is still present in the right channel of
the operator's headphones.
*
After making a selection, push the knob to
the new value.
Take
»
When the
Monitor Mode
operator can rotate the
select from the following options.
*
The selected source will be present-
Stereo:
ed in stereo on the Monitor speakers.
*
The left channel of the selected source
Left:
will be presented in both Monitor speakers.
*
The right channel of the selected
Right:
source will be presented in both Monitor
speakers.
*
Both channels of the selected
Sum L+R:
source will be summed and presented to both
Monitor speakers.
»
After making a selection, push the knob to
the new value.
»
When the
Headphone Mode
the
knob is active. This control works
HP Mode
the same as the
Monitor Mode
above, but affects the board operator's headphone
channel.
»
Pushing the
Function/Exit
the main Element screen.
The second Monitor Options screen (press the
key a second time) is shown in Fig-
Monitor Options
ure 4-30:
»
Rotating the
Function/Exit
lights the different control boxes onscreen, mak-
ing the highlighted control active. Labels on the
other SoftKnobs change depending on context.
»
When the
Rightmost Meter
rotating the
Met Mode/Take
the far right meter on Element's main screen will
behave. Pressing this knob will
tion.
*
means the meter will be slaved to
Dedicated
box is highlighted, the
knob to
Monitor/Take
Take
box is highlighted,
control described
knob returns you to
SoftKnob high-
box is highlighted,
knob selects how
your selec-
Take
Advertisement
Table of Contents
