Record Mode Section; Magic Key" Sequences For Monitor + 2-Fader Module; Source-Specific Channel Controls - Axia Element Installation & User Manual

Legend
TO INTERNAL NODE
PHYSICAL CONNECTION
FROM INTERNAL NODE
EXTERNAL CONNECTION
GANGED SWITCHES
MUTUALLY EXCLUSIVE SWITCHES
tinues to count while the display is frozen, and
a second press of the
running elapsed time counter.
• Start/Stop Key:
If the Count Up Timer is not running, pressing this
starts it. If the timer is running, pressing this key stops
the countdown and retains the last displayed timer in-
terval.
Record Mode Section
Element's
Record Mode
mode which can be set to automatically start a desig-
nated record device so that talent can record a phone call
or remote interview with a single button-press.
can be enabled or disabled for each
Mode
(see Chapter 5, "Show Profiles", for details).
• Engage Key:
Press this key to put Element into
Pressing this button activates a pre-determined record-
ing device. Pressing the key a second time deactivates
and stops the recorder.
Record Mode
EQ / DYN
HOST
MICROPHONE
SOURCE
HI, MID, LO EQ
COMPRESSOR
DE-ESSER
NOISE GATE
FADER
GAIN CELL
SPST SWITCH
SPDT SWITCH
ADD
SUBTRACT
SIGNAL MODE
DSP CELL
PAN / BALANCE
Figure 4-33: Control Room Operator Microphone channel block
again displays the
Freeze
is a special "one-touch"
Record
Show Profile
Record Mode
©2008 Axia Audio — Rev. 3.0
PHASE
Ø
MUTE
NORMAL
INVERT
PAN
PRE FDR ON AUX 1
PRE FDR AUX 2
AUX 3
PRE FDR
PRE FDR AUX 4
PRE ON
"Magic Key" Sequences for Monitor + 2-Fader Module
The list of "Magic Key" sequences for the Standard
Monitor Module are:
• IP Address Book:
keys on the keypad for 5 seconds.
7
• Clock & Timer Settings:
key for 5 seconds.
Options
• Capture Mode:
keys on the keypad for 5 seconds.
Press and hold the
• Help Screen:
keys on the keypad for 5 seconds.
# (pound)
Press and hold the
• Test Mode:
keys for 5 seconds.
row

Source-Specific Channel Controls

Some fader functions change their behavior to suit
the type of source assigned to the fader. A Guest Mic in-
. put has unique functions different from those of a Codec
input, and so forth. In this section we'll explain the chan-
nel functions unique to each type of source input, as well
as providing functional block diagrams of each type.
TALK TO X MIX
Σ TALK TO X
PVW
Σ PREVIEW
AUX 1
Σ AUX SEND 1
AUX 2
Σ AUX SEND 2
AUX 3
Σ AUX SEND 3
AUX 4
Σ AUX SEND 4
PGM 1
Σ PROGRAM 1
PGM 2
Σ PROGRAM 2
PGM 3
Σ PROGRAM 3
PGM 4
Σ PROGRAM 4
Press and hold the
* (star), 4
Press and hold the
Press and hold the
* (star)
* (star)
and
Help Right Ar-
&
Timer
&
2
&