Table of Contents
Advertisement
simplify NTP access by entering the server's
name,
instead of 128.249.1.1. Or,
tmc.edu
if you set up a DNS server in-house, you could
give real names to your StudioEngines and Phone
systems, then use those names instead of IP ad-
dresses in Element configuration pages.
•
Web Access Password:
is set to
and the password is blank. If you want
user
to add a password, type it in and click
that passwords will not display here once changed,
so be sure to make a note of it.
is where you upload new Element
•
Software Update
operating software.
»
Base File System Upgrade:
software updates do not include a Base File up-
date, but if one is required, click this link to up-
load and apply the new code.
Software Versions
»
packages currently stored on your Element's flash
memory card. The blue radio button is displayed
next to the active software image.
Set Current Image:
»
the active software package, click on the radio
button next to the image you wish to activate, and
click this button. A reboot is necessary to load
the new software choice.
Delete Current Image:
»
next to software you wish to delete and click this
button. Note that you cannot delete the active
software image.
Good Housekeeping: It's best not to keep too
many old software images around. They clutter
up Element's flash memory, leaving less space
for Show Profiles, syslogs, and other important
data. We recommend that you keep only one
previous software package stored in Element.
»
Upload New Image:
makes new software packages available for
download from www.AxiaAudio.com. Use the
and
Browse
Upload Image
new software, as described in the Technical Bul-
letin that accompanies each software release.
shuts down Element and restarts it.
»
Reboot
(Remember that mixing takes place in the
By default, the username
Note
Change.
Most Element
shows you the software
When you want to change
Click the radio button
From time to time, Axia
buttons to install
©2008 Axia Audio — Rev. 3.0
Fig. 7-3: Customize screen
StudioEngine, so this can be done even while
you are on the air. Interruptions of your program
stream, if any, will last less than 1 second.) A re-
boot is required after changing active software.
The Customize Menu
This utility allows you to place your
•
User Logo:
station's logo on the Element operator display. To
do so, create a PNG file in Photoshop or any similar
image editor. This file must measure exactly 129 x
97 pixels. Use the
Browse
buttons to install your logo file. Upon reboot, this
logo will appear on the Operator's display. To delete
a displayed logo, click the
and reboot.
•
Screenshot Compression:
the Operator's display for documentation, trouble-
shooting or training purposes. You may choose to
save your screenshot in JPEG or PNG format, with
three levels of compression quality using the
and
pression Type
Compression Quality
down boxes. Click
Save Settings
done.
New in v2.0 Element software, you can
•
Logging:
now save detailed syslogs. These options let you
and
Upload User Logo
button
Delete User Logo
You can save a shot of
Com-
drop-
when you are
Advertisement
Table of Contents
