Module - Axia Element Installation & User Manual

Figure 4-28: Monitor Options menu screen #1.
»
When the
Talk to Monitor 1 Talk
Talk to Monitor 2 Dim
rotating the
TALK LEV
els of the
Monitor 1 Talk To
the level.
Monitor 2 Dim
»
When the
Headphones Follow Monitors
is highlighted, rotating the
chooses whether the headphone source will fol-
low the Monitor 1 source selection. Push the
knob to your selection.
Take
*
means that Headphone and Monitor
Linked
1 selections will mirror each other; making a
selecton from one bank of keys on the Moni-
tor Module will automatically choose the
same source on the other bank.
*
allows Monitor 1 and Headphone
Unlinked
sources to be selected independently of each
other.
The strongest link: You've noticed that there
are no Direct Selection Keys for the headphone
source on the Monitor + 2-Fader Module. By de-
fault, CR Headphones and Monitor 1 sources are
linked - the phones will play whatever source is
and or
Dim
control is highlighted,
SoftKnob adjusts the lev-
and levels and
Dim
box
HP LINK/Take
©2008 Axia Audio — Rev. 3.0
Figure 4-29: Headphone EQ menu screen.
assigned to the monitor speakers. So how can
the operator select a headphone source if s/he
choosees to Unlink the headphones?
When Unlinked is chosen in the Headphones
Follow Monitors box, the Preview knob doubles
as the headphone source selector. When the
operator pushes the Preview knob, the Head-
phone Source menu is displayed. Voila!
» When the
Headphone Processing
ted, pressing the
HP Proc/Take
onscreen and takes the operator
Change Settings
to the screen shown in Figure 4-29.
H/P Process
When the screen is displayed, a graphical rep-
EQ
resentation of the equalization curve is displayed
as the controls are adjusted. The screen also in-
dicates the amount of cut/boost applied, and the
center frequency of each band.
* Rotate the
Function/Exit
light the
Lo, Mid
onscreen. Notice that the left and center Soft-
Knob labels change to display
Freq, Mid Gain/Mid Freq
as you rotate the
Freq
* The leftmost SoftKnob is the
rotate to adjust the amount of gain or cut ap-
box is highlig-
knob selects
SoftKnob to high-
or band knobs shown
Hi
Lo Gain/Lo
and
Hi Gain/Hi
knob.
Function
control;
Gain