Show Ip Ospf Area - Dell PowerConnect 7000 Series Reference Manual
Systems cli reference guide
Hide thumbs
Also See for PowerConnect 7000 Series:
- Stacking instructions (37 pages) ,
- Technical white paper (34 pages)
Table of Contents
Advertisement
Syntax
show ip ospf abr
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show ip ospf abr
Type
Router Id
----- ---------
INTRA 3.3.3.3
INTRA 4.4.4.4
show ip ospf area
Use the show ip ospf area command in Privileged EXEC mode to display
information about the identified OSPF area.
Syntax
show ip ospf area area-id
area-id — Identifies the OSPF area whose ranges are being displayed.
•
(Range: 0–4294967295)
Default Configuration
This command has no default configuration.
Cost
Area ID
----- --------------- ---------
1
0.0.0.1
10
0.0.0.1
Next Hop
Next Hop
Intf
--------
10.1.23.3
vlan11
10.1.24.4
vlan12
OSPF Commands
1153
Advertisement
Table of Contents
