Table of Contents
Advertisement
Getting Started
Installing the Printer Driver
Installing the Printer Driver (USB)
1
2
3
4
5
6
7
Related Topics:
24
Ensure the QL-800 is powered on but not connected to your PC via the USB cable.
Power on your PC and insert the QL-800 Installer CD in the CD drive. The Installer CD
wizard will open. Choose
If the autorun program does not start automatically, use Windows Explorer to launch the
"Setup.exe" file located on the CD.
Note: If you do not have a CD drive, you can obtain the software from
www.QuickLabel.com/downloads.
Choose
Install Printer
Software. The software installation wizard will start.
Note: If the Windows logo testing or publisher verification warning messages appear
during installation, choose to continue the installation.
When prompted to select a printer connection method, choose
USB. Then choose Next.
Note: A USB configuration is required for the initial installation. You can later install the
printer as a network printer.
When prompted, connect the QL-800 to your PC with a USB cable. The installation will
continue once the USB connection is made.
When prompted, select whether the QL-800 will be set as the default printer.
Choose Finish.
-
"Resolving Windows 7/8/10 USB Installation Issues" on page 130
Install
Driver.
Configure to print using
QL-800 User Guide
Advertisement
Table of Contents
