Table of Contents
Advertisement
Cleaning
Cleaning the Printer Exterior
Over time, the plastic exterior panels of the printer may accumulate dust, dirt, etc. You can
clean these panels as needed.
1
2
Cleaning the Input Pinch Rollers
As media is fed into the printer, it is advanced by a series of rollers just inside the media entry
slot. Over time, these rollers may accumulate dust or adhesive residue. You can clean these
input pinch rollers as needed.
1
2
3
4
5
QL-800 User Guide
Dampen a clean, lint-free cloth with water.
Gently clean the plastic exterior surfaces using the cloth.
Anti-static electronic equipment cleaner may be used for exterior cleaning as needed.
Remove media from the printer.
Power off the printer.
On the rear of the printer, turn the power inlet switch off.
Open the top cover.
Disconnect the roller cover plate [2] by removing the two screws [1]. Slide the plate
outward, and then up away from the printer. Removing the plate may require a small
amount of force because of the tight fit. Set the plate and screws aside.
Printer Maintenance
[1]
[2]
[1]
81
Advertisement
Table of Contents
