Table of Contents
Advertisement
8
Before Installing the Rewinder
Before installing the rewinder, observe the following precautions.
•
•
•
•
•
QL-800 User Guide
No rewinder feet should float. The rewinder must be held level constantly.
The rewinder must be installed on the same plane as the printer.
The rewinder weighs 25 pounds (11.3 kilograms). When placing the rewinder on a desk,
table, or other similar surface, it must be sturdy and stable enough to support the weight of
the printer, rewinder, and roll media. A table that can support at least 150 pounds (68
kilograms) is recommended.
The rewinder and associated bracket require a surface 14 inches (356 mm) in length and
21 inches (534) in width.
Do not turn the rewinder mandrel by hand to rewind the media. Turning the mandrel by
hand can result in rewinder damage.
Rewinder
135
Advertisement
Table of Contents
