Table of Contents
Advertisement
Quick Start
Installing the Printer Driver (USB)
18
Use the following instructions to install the printer via USB 2.0 on Windows XP,
Windows Vista, Windows 7, or Windows 8.
Note: When the Windows logo testing, publisher verification, or digital signing warning
messages appear, choose to continue the installation. These messages indicate that
the driver has not been "logo tested" by Microsoft. However, it has been tested
thoroughly by QuickLabel, and will not cause any of the problems listed in these
messages.
1
Ensure the Kiaro! 50 is powered on but not connected to your computer via the
USB cable.
2
Obtain the installer package from the QuickLabel web site. Launch the installer to
open the installation wizard. Choose Next.
3
Use the driver installation wizard to install the driver. Refer to the following
information during this process.
•
Choose the USB connection method when prompted.
•
Select an installation location for the Kiaro! 50 Maintenance Utility when
prompted.
Choose Finish in the installation wizard after successfully installing the Kiaro! 50
Maintenance Utility and driver.
4
Connect the smaller end of the USB cable to the Kiaro! 50 USB type B port.
Connect the larger end of the USB cable to an available USB 2.0 port on your
computer.
5
Once the USB connection is made, the Windows Found New Hardware Wizard will
start. This wizard will guide you through the rest of the installation process. Refer
to the following general guidelines when using this wizard.
•
If you are prompted to connect to Windows Update to search for software,
choose no.
Kiaro! 50 User Guide
Advertisement
Table of Contents
