Table of Contents
Advertisement
QL-800 Maintenance Utility
3
Upgrading the Printer and Print Module Firmware
1
2
3
4
5
6
7
8
66
View the printer information.
•
Printer - This section provides the serial number of the printer and the installed
firmware version number. It also provides the transport usage in inches.
•
Print Module - This section provides the print module installed firmware version and
module usage.
•
Ink Levels - This section provides the remaining ink percentages of ink cartridges.
•
Printhead - This section provides the remaining service life percentage of the
printhead. If print quality is acceptable, you can continue to use a printhead past 100%
of its service life.
This section also provides the serial number and number of inches printed with the
printhead.
•
Parts Life - This section provides the remaining service life percentages of the aerosol
filter, maintenance roller, maintenance cartridge, and cutter.
Ensure the QL800_vX_X.upgrade file is accessible from your PC. The vX_X in the file
name indicates the firmware package version.
Launch the QL-800 Maintenance Utility.
From the Windows Start Menu, choose
QL-800 Maintenance
Utility. A language and printer prompt will open.
Select a display language and the QL-800 printer you want to connect to. Choose OK.
Choose the
Printer Information
Choose
Upgrade
Firmware. The Upgrade Firmware window will open.
Choose the
...
button. Browse to the QL800_vX_X.upgrade file and choose Open.
Choose
Send to
Printer.
A progress indicator will be displayed and the firmware will be upgraded. When this process
is complete, proceed to the next step.
Note: The upgrade process requires up to 25 minutes. Allow the upgrade process to finish
without interruption.
Power off the printer. On the rear of the printer, turn the power inlet switch off.
On the rear of the printer, turn the power inlet switch on. Power on the printer.
Start > All Programs > QuickLabel QL-800 >
tab.
QL-800 User Guide
Advertisement
Table of Contents
