Identifying And Resolving Priming Problems - QuickLabel QL-800 User Manual

Troubleshooting

Identifying and Resolving Priming Problems

The printer is primed when you use any of the following features:
•
•
•
A successful priming operation can be verified by opening the top cover and examining the ink
tubes illustrated below. If the five tubes are filled with ink, the printer is primed.
If ink is not visible in all of the indicated tubes, the priming function was not successful. In this
situation, do not use any priming functions again or an ink overflow may occur.
Instead, you may need to perform a special restorative pre-prime under the guidance of
Technical Support. When the restorative pre-prime has finished, you will be able to prime the
printhead using the
Utility.
Note: The restorative pre-prime procedure consumes ink. Only use this function as needed
and with the guidance of Technical Support.
134
After Moving function in the
After Shipping function in the
Printhead replacement function in the
Utility
After Moving
Cleaning tab of the QL-800 Maintenance Utility
Cleaning tab of the QL-800 Maintenance Utility
Parts Replacement
function in the Cleaning
tab of the QL-800 Maintenance
tab of the QL-800 Maintenance
QL-800 User Guide