Table of Contents
Advertisement
QL-800 Overview
LED Indicators
42
#
Key
4
Back-Feed
5
Cut
#
LED
1
Power
2
Error
3
Cyan Ink
4
Magenta Ink
5
Yellow Ink
6
Black Ink
Description
• Press and release the back-feed key to
back-feed media one label length.
• Press and hold the back-feed key to back-feed
media until you release the key.
• To unload media, press and hold the back-feed
key until the printer beeps once. Press and hold
the back-feed key again to continue and unload
media.
If the printer is in the ready state, press and hold
this key for approximately one second to cut media
at the exit.
[1]
[2]
[3] [4] [5] [6] [7]
Description
This green LED indicates the power status of the
printer.
• Off - Printer is off or in sleep mode.
• Flashing - Printer is initializing or busy.
• Solid - Printer is on and ready.
This red LED indicates when error conditions
occur.
These yellow LEDs indicate the status of each ink
cartridge.
• Off - Ink cartridge has sufficient ink.
• Flashing - Ink cartridge is low.
• Solid - Ink cartridge is empty.
QL-800 User Guide
Advertisement
Table of Contents
