Table of Contents
Advertisement
Getting Started
•
•
15 inches
381 mm
Installation Precautions
When installing the printer, observe the following precautions.
•
•
•
22
When placing the printer on a desk, table, or other similar surface, it must be sturdy and
stable enough to support the weight of the printer. The table must be rated for a minimum
of 100 pounds.
The minimum space required for installation and maintenance is shown below.
Imaging faults can result from dew condensation that occurs when the printer is moved
from a cold place to a warm place. Leave the unpacked printer as is for at least two hours
before installing it.
The printer is heavy and moving it requires two people. One person should lift the front by
the indicated lift point, while the other person should lift the back by the indicated lift point.
Do not lift the printer by the mandrel. Lift the front of the printer by the recessed handle. Lift
the rear of the printer by the flat area of the purple frame above the mandrel. Keep the
printer level while lifting it.
The printer has rubber feet that help secure the printer and prevent accidental movement.
When moving the printer on the installation surface, apply slight upward lifting pressure.
Dragging the printer may result in damage to the rubber feet.
8 inches
203 mm
17.75 inches
451 mm
8 inches
203 mm
QL-800 User Guide
Advertisement
Table of Contents
