Table of Contents
Advertisement
Installing the Printer Driver (Network)
Use the following instructions to install the printer via a network connection.
For detailed information about the topic of networking, refer to documentation applicable to your
network environment and/or contact your network administrator.
1
2
3
4
5
6
7
QL-800 User Guide
Ensure the QL-800 is powered on and connected to the network via a LAN cable.
Power on your PC and insert the QL-800 Installer CD in the CD drive. The Installer CD
wizard will open. Choose
If the autorun program does not start automatically, use Windows Explorer to launch the
"Setup.exe" file located on the CD.
Note: If you do not have a CD drive, you can obtain the software from
www.QuickLabel.com/downloads.
Choose
Install Printer
Software. The software installation wizard will start.
Note: If the Windows logo testing or publisher verification warning messages appear
during installation, choose to continue the installation.
When prompted to select a printer connection method, choose
network. Then choose Next.
When prompted, view the list of printers discovered on your network.
•
If your QL-800 printer is on the list, select it.
•
If your QL-800 printer is not on the list, choose
printer by entering its IP address.
26.
When the printer is found, select it.
With your QL-800 printer selected, choose Next.
When prompted, select whether the QL-800 will be set as the default printer.
Choose Finish.
Install
Driver.
See "Changing Printer Networking Settings" on page
Configure to print over the
Other
Printer. You can search for the
Getting Started
25
Advertisement
Table of Contents
