System Requirements; Powering On - QuickLabel QL-800 User Manual

System Requirements

•
•
•
•
•

Powering On

1
2
Related Topics:
QL-800 User Guide
Windows® 10/8/7 Server 2012/2008
Microsoft .NET Framework 3.5 SP1
350 MB free hard drive space
CD/DVD drive (or Internet connection)
One available USB 2.0 port for USB installation or network connectivity for network
installation
Connect the power cable to the printer power inlet [1]. Connect the other end of the power
cable to the power source. Then turn on the power via the power inlet switch [2].
[3]
Press and hold the power key [3] for one second to turn the printer on.
The printer will begin the power-up process, including opening the printhead latch, and the
green LED will flash momentarily. When the green LED stops flashing and remains on, the
printer will be ready to use.
Note: The red error LED will be on until you use the After Shipping wizard later in this
guide.
Note: If the printer is on, you can press and hold the power key [3] for three seconds to
turn it off.
- "Powering Up After Extended Downtime" on page 87
Getting Started
[2]
[1]
23