Error 1051 - Not ready to print
The printer is unable to start a print job in the current state.
Solutions
Use the following solutions to troubleshoot the issue. The most likely solutions are listed first,
followed by other possibilities. Check to see if the issue is resolved after performing each
recommended solution. If the issue is not resolved, proceed to the next solution. If the issue
persists after performing all solutions, contact Technical Support.
1) Complete the current task.
Error 2001 - Faulty Printhead
The printhead is damaged or has a poor electrical connection.
Solutions
Use the following solutions to troubleshoot the issue. The most likely solutions are listed first,
followed by other possibilities. Check to see if the issue is resolved after performing each
recommended solution. If the issue is not resolved, proceed to the next solution. If the issue
persists after performing all solutions, contact Technical Support.
1) Remove the printhead using the printhead replacement function in the Parts Replacement
QL-800 User Guide
Use a clean, lint-free cloth dampened with isopropyl alcohol to clean the indicated area on
the maintenance cartridge.
Insert the maintenance cartridge and close the lower side door.
Press and release the power key to clear the error.
tab of the QL-800 Maintenance Utility.
Error Messages
109