11
12
Checking the Included Parts
Check to make sure the following items are included with the printer.
•
•
•
•
•
Before Installing the Printer
Choosing an Installation Location
The installation environment must be as described in this section.
•
•
•
•
•
•
•
•
QL-800 User Guide
Grasp the maintenance cartridge and pull it straight out of the printer. Then reinstall the
maintenance cartridge. Ensure it is fully inserted in the printer.
Close the lower side door.
Power cable
USB cable (do not connect until prompted during driver installation)
Printhead
Four ink cartridges (one for each color)
Installation CD
The printer power cord must be able to connect to an outlet (100V - 240V AC). This outlet
must be easily accessible.
Avoid installing the printer near a faucet, water heater, humidifier, or refrigerator.
Ensure the environment temperature is within 41 to 95 degrees Fahrenheit (5 to 35 degrees
Celsius). For optimal print quality, an environment temperature of approximately 73
degrees Fahrenheit (23 degrees Celsius) is recommended.
Ensure the environment humidity is within 20% to 80% (non-condensing) relative humidity.
For optimal print quality, a relative humidity of approximately 60% is recommended.
Avoid placing the printer in areas exposed to high temperature and humidity, extremely low
temperature, severe temperature changes, or direct sunlight. Especially, avoid placing the
printer near fire, outdoors, in distribution warehouses, or in refrigerated areas.
Avoid installing the printer in areas subject to dust.
The room must be properly ventilated.
No printer feet should float. The printer must be held level constantly.
Getting Started
21