Table of Contents
Advertisement
QL-800 Overview
Back View
1
2
3
4
5
6
7
8
9
40
#
Part
Media Entry Slot
Reserved
USB Port
LAN Port
Power Inlet
Inner Flange
Mandrel
Outer Flange
Wing Nut
[1]
[7]
[9]
[8]
Media enters the printer through this slot.
This port is not used. Do not connect to this port.
Connect the USB cable here when using the USB
connection method.
Connect the LAN cable here when using the LAN
connection method.
Connect the power cord here.
Position the media roll edge so it touches this
flange.
Install the media roll on the mandrel.
Adjust this flange so it touches the media roll edge
opposite the inner flange.
Turn this nut to tighten or loosen the media roll lock
on the mandrel.
[2]
[3]
[4]
[5]
[6]
Description
QL-800 User Guide
Advertisement
Table of Contents
