Front Indicator Module (Fim) Panel - Oracle X7-8 Service Manual

Troubleshooting Using Status Indicators
"Front Indicator Module (FIM) Panel" on page 60
■
"Power Supply (PS) Indicators" on page 64
■
"Fan Module (FM) Indicators" on page 63
■
"Storage Drive Indicators" on page 69
■
"System Module (SMOD) Indicators" on page 65
■
"Dual PCIe Card Carrier (DPCC) Indicators" on page 70
■
"AC Power Block Inlet Indicators" on page 71
■
Related Information
"Controls and Indicators" on page 72
■
"Identifying Components" on page 24
■

Front Indicator Module (FIM) Panel

The front indicator module (FIM) panel is located at the top left corner of the server (as viewed
from the front of the server). Use buttons to control the server. Use indicators to determine
server status. The FIM provides controls and indicators for three system configurations.
Single 4-socket: The FIM provides controls and indicators for System A (SMOD0) only.
■
System B (SMOD1) buttons and indicators are not operational.
Dual 4-socket: The FIM provides separate controls and indicators for System A (SMOD0)
■
and System B (SMOD1).
8-socket: The FIM provides controls and indicators for System A (SMOD0) and System B
■
CMODs 4-7. Other System B (SMOD1) buttons and indicators are not operational.
The following figure shows FIM buttons and indicators.
60 Oracle Server X7-8 Service Manual • October 2017