Install Mounting Brackets On The Server - Oracle X5-2 Installation Manual

Install Mounting Brackets On the Server

Install Mounting Brackets On the Server

To install the mounting brackets onto the sides of the server:
Position a mounting bracket against the chassis so that the slide-rail lock is
1.
at the server front, and the five keyhole openings on the mounting bracket are
aligned with the five locating pins on the side of the chassis.
Number
1
2
3
4
2. With the heads of the five chassis locating pins protruding through the five
keyhole openings in the mounting bracket, pull the mounting bracket toward
the front of the chassis until the mounting bracket clip locks into place with an
audible click.
44 Oracle Server X5-2 Installation Guide • January 2021
Description
Chassis front
Slide-rail lock
Mounting bracket
Mounting bracket clip