Table of Contents
Advertisement
Install the PCI Mezzanine
4.
Use a No. 2 Phillips screwdriver to loosen the four green captive screws found at
the four corners of the PCI mezzanine.
5.
Lift the PCI mezzanine up and out of the system.
6.
Lift the PCI mezzanine away from the chassis and place it on an antistatic mat.
You are now ready to service components under the PCI mezzanine.
Related Information
"Install the PCI Mezzanine" on page 104
■
"Replacing PCIe2 Risers" on page 107
■
"Replacing Lower PCIe2 Cards" on page 123
■
Install the PCI Mezzanine
1.
Position the PCI mezzanine onto the chassis.
104
Sun Netra X4270 Server • September 2015
Advertisement
Table of Contents
