How to Use the Front Panel and Console
Setup with the Front Panel
Composition of Touch Panel and Display
Mode switching button (valid at SELECTION display)
Press this to switch 5 kinds of mode.
1) Monitor Mode
2) Parameter Set up Mode
3) EEPROM Write Mode
Setup with the Console
Composition of Touch Panel and Display
Mode Switching Button
1) Monitor mode
2) Parameter setup mode
3) EEPROM write mode
58
Display LED (6-digit)
All of LED will flash when error occurs,
and switch to error display screen.
All of LED will flash slowly when warning occurs.
Shifting of the digit for data changing to higher digit.
(Valid to the digit whose decimal point flashes.)
Press these to change display and data, select
parameters and execute actions.
(Change/Selection/Execution is valid to the digit
which decimal point flashes.)
Numerical value increases by pressing ,
decreases by pressing
SET Button (valid at any time)
Press this to switch SELECTION and
EXECUTTION display.
4) Auto-Gain Tuning Mode
5) Auxiliary Function Mode
Display LED (6-digit)
All of LED will flash when error occurs, and switch to
error display screen.
Displays ID No. (address) of selected driver (in 2 digits).
The value set in Pr00(address) is ID No. Parameter No.
is displayed (2 digits) at parameter setup mode.
Press this to shift the digit for data change.
Press these to change data or execute selected action
of parameter.
Numerical value increases by pressing ,
decreases by pressing
SET Button
Press this to shift each mode which is selected by
mode switching button to EXECUTION display.
Press this to switch 6 kinds of mode.
4) Normal auto-gain tuning mode
5) Auxiliary function mode
6) Copy mode
,
.
,
.