Table of Contents
Advertisement
Controls and their Functions
CONTROL PANEL
eiaial
olla
@ PREROLL TIME Selector Switch
Sets the preroll time to 3, 5, 7, 10 or 15 seconds. 10-second
and 15-second setting are for colour frame editing.
2] CAPSTAN OVERRIDE Selector Switch
Synchronization is executed by Sontrouling the speed of the
capstan on the VTR.
COLOUR
' FRAMING:
To execute colour frame synchronized edits.
When
using the 34P I/F Board (using the S-
VHS or VHS VTR), the VTR setting will be
required.
ON:
To execute an edit using a VTR that can
execute synchronization.
OFF:
The VTR will not execute synchronization.
(Editing precision decreases.)
© DISPLAY For PLAYER
O EVENT No. Display
Displays the event number.
@ DISPLAY For RECORDER
© Buzzer ON/OFF
ON - = The buzzer will function whenever an operation
error is detected.
OFF-
= The buzzer is disabled.
4 je 42 ee 43"
ee
i:
<=) lp
O
= \ @
@ EDIT REF Selector Switch
Selects the tape position displayed, either the time code
(TC) or control signal (CTL).
Whether the reference signal is TC or CTL depends on the
setting of this switch.
© @ TC/CTL tamp
z
TC:
This lamp lights up when
the tape position
is
displayed from Time Code.
CTL:
This lamp lights up when the tape position is
displayed from the control signal (CTL).
© @® RESET Button
If it is pressed when the CTL lamp is lit, the display
indication of the currently selected VTR is reset to "O" and its
edit data is erased.
© SERVO LOCK lamp
P1:
Lights up when the cylinder and the capstan servo of
PLAYER 1 are locked.
P2:
Lights up when the cylinder and the capstan servo of
_ PLAYER 2 are locked.
R: — Lights up when the cylinder and the capstan servo of
the RECORDER are locked.
@© REC RUN/FREE RUN Selector Switch
REC RUN:
Time code increases when the VTR is in the
REC mode.
FREE RUN:
Time code increases irrespective of the VTR
mode.
Advertisement
Table of Contents
