Auxiliary Function Mode - Panasonic minas a4 series Instruction Manual

Auxiliary Function Mode

Alarm Clear Screen
Protective function will be activated and release the motor stall status (error status).
Operation at SELECTION display
Starting from the initial LED status,
Press four time after pressing
then press to make a display to
Operation at EXECUTION display
Press to call for
EXECUTION display of
Keep pressing until the console (LED)
changes to
Alarm clear starts.
Clearing finishes.
After alarm cleaning, return to SELECTION display, referring to structure of each mode (P.60 and 61).
<Remarks>
Don't disconnect the console from the driver between
Should the connector is pulled out, insert it again and repeat the procedures from the beginning.
,
Alarm clear completes
" " increases by pressing
(approx. 5sec) as the right fig. shows.
Clear is not finished.
Release the error by resetting
the power.
and
[Preparation]
.
73