Explanation Of Operation Panel; Handling For The Displays Of Output Current, Output Voltage And Internal Dc Voltage - Panasonic AAD03011 Instruction Manual

Explanation of
Operation Panel
Main display
MODE button
SET button
Main display
RUN button
STOP button
MODE button
SET button
UP) button
DOWN) button
Handling for the displays of output current, output voltage and internal
DC voltage.
1 The displayed output current, output voltage and internal DC voltage are not
intended for precise measurement. Use this only as a guide value.
(Use a separate measuring instrument when precise values are required.)
2 Especially for the displayed output current, a relatively large value may be
displayed at approx.40% or less of the rated current. (For example, even if there
is no output current, a certain level may be displayed. Note that when the
inverter is stopped, "0.0A" will be displayed.)
MODE
SET
The output frequency, output current, line speed, control
status monitor, data for function setting and parameter No.
are displayed.
The switch is used to start the inverter.
The switch is used to stop the inverter.
This switch is used to change to each "output frequency,
output current display", "frequency setting, control status
monitor", "rotation direction setting", "function setting" mode,
and to switch the display from the data to mode display.
The switch is used to change the display between the mode
and data display, and to save the data. In the "Output
frequency, output current display mode", this switch changes
the display between the frequency and current.
This switch is used to change the data or output frequency,
and to set forward run direction when carrying out forward
rotation with the operation panel.
This switch is used to change the data or output frequency,
and to set reverse run direction when carrying out reverse
rotation with the operation panel.
Hz
RUN button
RUN
STOP button
STOP
DOWN) button
UP) button
15