4-2. Installation
4-2. Installation
1. Panel Mount
1) Board type mounting method (without mounting plate)
• Mount the stacked boards on the panel with four M3 size screws as follows.
2) Case type mounting method (using mounting plate)
• Mount the mounting plate on the panel with four M4 size screws as follows.
M4 size
screws
Mounting plate
2. DIN Rail Mount
Attachment
• Put the claw of the FP-M mounting plate on the DIN
rail and attach the FP-M on the rail.
FP-M
case type
44
Panel
M3 size screws
Panel
Claw
DIN rail
DIN rail
attachment lever
Mounting hole dimension
174 mm (6.850 in.)
4-M3 or 4-4 dia.
Mounting hole dimension
205 mm (8.071 in.)
Detachment
• To detach the FP-M from the DIN rail, pull the lever
down with a slotted screwdriver.
FP-M case type
2
Slotted
screwdriver
4-M4 or 4-5 dia.
DIN rail
DIN rail
1
attachment lever