Printing Test Pattern; Cleaning Printer Nozzles - Pitney Bowes K700 Operator's Manual

11. Press Enter/yes to confirm the replacement.
A print head initialization occurs which lasts
about 2-3 minutes.
12. When prompted, insert an envelope/tape
sheet to print a test pattern to confirm print
quality.
13. If test pattern looks good (see figures below),
press Enter/yes. If it looks poor, proceed with
step 5 from "Printing a Test Pattern" below.

Printing Test Pattern

Running a print test may help you identify a printing problem.
Menu
1. Press
2. Use the Review keys to scroll to "Use ink functions?" and press
Enter/yes.
3. Use the Review keys to scroll to "Print test pattern?" and press
Enter/yes.
4. When prompted, insert an envelope or tape sheet into the
mailstation™
prompted.
5. At "Is test pattern OK" prompt, either press
(you'll return to the main screen), or press No and continue at step 4 in
the "Cleaning Printer Nozzle" procedure on the next page.

Cleaning Printer Nozzles

Cleaning the printer nozzles may help you fix a printing problem.
Menu
1. Press
2. Use the Review keys to scroll to "Use ink functions?" and press
Enter/yes.
3. Use the Review keys to scroll to "Clean printer nozzles?" and press
Enter/yes. A "Preparing ink Please wait..." message displays as the
mailstation™
mailstation Digital Postal Meter | SV61374 Rev. J
™
.
meter. After a few seconds, remove envelope when
.
meter performs its cleaning.
7 ● Ink Maintenance
Enter/yes
Good Test Print
(No Missing Lines)
Poor Test Print
(Missing Lines)
if it looks good
7-3