Re-Entering The Server Serial Number And Product Id - HPE ProLiant EC200a Maintenance And Service Manual

Install the system board assembly.
1.
Secure the screw on the fin base end of the heatsink.
2.

Re-entering the server serial number and product ID

After you replace the system board, you must re-enter the server serial number and the product ID:
During the server startup sequence, press the F9 key to access UEFI System Utilities.
1.
Select System Configuration > BIOS/Platform Configuration (RBSU) > Advanced Options >
2.
Advanced System ROM Options > Serial Number, and then press the Enter key.
Enter the serial number and press the Enter key.
3.
The following message appears:
The serial number should only be modified by qualified service personnel.
This value should always match the serial number located on the chassis.
To clear the warning, press the Enter key.
4.
Enter the serial number and press the Enter key.
5.
Select Product ID.
6.
Removal and replacement procedures 49