Identification; Ce Marking; Safety; Designated Use - Kemppi A7 Operating Manual

3.

IDENTIFICATION

The Robot Gun Cleaning Station is used in industry and
in the trade for automatic cleaning of the gas nozzle
interior of MIG/MAG welding guns. The cleaning station
helps to extend the service life of the welding gun and
the maintenance intervals. These instructions describe the
Robot Gun Cleaning Station product only. The Robot Gun
Cleaning Station must be operated only as supplied or
equipped with authentic Kemppi spare parts.
4.

CE MARKING

This device fulfils the requirements of the following EU
directives:
• The Machinery Directive, 2006/42/EC
• The EMC Directive, 2004/108/EC
• The RoHS Directive, 2011/65/EU
5.

SAFETY

Read and follow the additional safety instructions
enclosed.

5.1 Designated use

The Robot Gun Cleaning Station forms a part of the robot
welding system. It may be used only for the purpose
described in these instructions, in the manner described.
Follow the operation, maintenance, and servicing
conditions whenever using the device.
Any other use is considered contrary to the intended use.
Unauthorized conversions
modifications are not allowed.
The warranty does not cover wear parts and damage due
to overloading or improper use.

5.2 Responsibilities of the user

• Keep the operating instructions within easy reach
in the location of the device for reference, and
include the operating instructions when handing
over the product.
• Installation, operation, and maintenance work
may only be carried out by qualified personnel.
Qualified personnel are persons who, on account
of their special training, knowledge, experience,
and familiarity with the relevant standards, are
able to assess the tasks assigned to them and
identify possible dangers.
• Keep all other people out of the work area.
• Follow the accident prevention regulations of the
relevant country.
• Ensure good lighting of the work area, and keep
it clean.
© Kemppi Oy 2016
or power-increasing

5.3 Personal protective equipment

To avoid danger to the user, using personal protective
equipment (PPE) is recommended in these instructions.
PPE consists of the following
4
Robot Gun Cleaning Station
• Observe the following standards and guidelines
in particular:
• 89/391/EEC: Directive on the introduction
of measures to encourage improvements in
the safety and health of workers at work
• 2009/104/EC: Directive concerning the
minimum safety and health requirements
for the use of work equipment by workers
at work
• 2004/108/EC: Directive on the
harmonization of the laws of the Member
States relating to electromagnetic
compatibility The occupational health and
safety regulations of the country in question
• Regulations on occupational safety and
accident prevention
• Protective clothing
• Safety goggles
• A class-P3 respiratory mask
• Gloves
• Safety shoes
1616