Batch Add Iax Extensions; Table 46: Batch Add Iax Extension Parameters - Grandstream Networks UCM6202 User Manual

Enable T.38
Enable or disable T.38 UDPTL Support.
UDPTL
If enable "All", users do not need to enter password when making an outbound call. If
Skip Trunk Auth
enable "Follow Me", the user can dial out via follow me without password.
Select audio and video codec for the extension. The available codecs are: PCMU,
PCMA, GSM, AAL2-G.726-32, G.722, G.729, G.723, Ilbc, ADPCM, LPC10, H.264,
Codec Preference
H.263, H.263p and VP8.

Batch Add IAX Extensions

Under Web GUI->PBX->Basic/Call Routes->Extensions, click on "Batch Add Extensions"->"Batch Add
IAX Extensions".
General
Configure the starting extension number of the batch of extensions to be added.
Start Extension
Create Number Specify the number of extensions to be added. The default setting is 5.
Assign permission level to the user. The available permissions are "Internal", "Local",
"National" and "International" from the lowest level to the highest level. The default
setting is "Internal".
Permission
Note:
Users need to have the same level as or higher level than an outbound rule's
privilege in order to make outbound calls from this rule.
Enable Voicemail Enable Voicemail for the user. The default setting is "Yes".
Configure the SIP/IAX password for the users. Three options are available to create
password for the batch of extensions.

SIP/IAX Password


Configure Voicemail password (digits only) for the users.

Voicemail
Password


Configure the number of seconds to ring the user before the call is forwarded to
Ring Timeout
voicemail (voicemail is enabled) or hang up (voicemail is disabled). If not specified,

Table 46: Batch Add IAX Extension Parameters

User Random Password.
A random secure password will be automatically generated. It is recommended
to use this password for security purpose.
Use Extension as Password.
Enter a password to be used on all the extensions in the batch.
User Random Password.
A random password in digits will be automatically generated. It is recommended
to use this password for security purpose.
Use Extension as Password.
Enter a password to be used on all the extensions in the batch.
UMC6200 Series User Manual
P a g e | 134