Time Settings; Table 18: Time Auto Updating; Figure 18: Ucm6100 Email Settings - Grandstream Networks UCM6108 User Manual

http://arttel.ru
Click on "Test". In the prompt, fill in a valid Email address to send a test Email to verify the Email settings on
the UCM6100.

TIME SETTINGS

The current system time on the UCM6100 is displayed on the upper right of the web page. It can also be
found under Web GUI->Status->System Status->General.
To configure the UCM6100 to update time automatically, go to Web GUI->Settings->Time
Settings->Time Auto Updating.
Remote NTP Server
Enable DHCP Option 2
Enable DHCP Option 42
Firmware Version 1.0.2.21
http://arttel.ru/shop/ip-atc/ip-ats-grandstream-ucm6102

Figure 18: UCM6100 Email Settings

Table 18: Time Auto Updating

Specify the URL or IP address of the NTP server for the UCM6100 to
synchronize the date and time. The default NTP server is
ntp.ipvideotalk.com.
If set to "Yes", the UCM6100 is allowed to get provisioned for Time Zone
from DHCP Option 2 in the local server automatically. The default
setting is "Yes".
If set to "Yes", the UCM6100 is allowed to get provisioned for NTP
Server from DHCP Option 42 in the local server automatically. This will
override the manually configured NTP Server. The default setting is
"Yes".
UCM6100 Series IP PBX User Manual Page 44 of 159