Figure 133: Page/Intercom Group Settings - Grandstream Networks UCM6202 User Manual


Click on to edit the paging/intercom group.

Click on to delete the paging/intercom group.

Click on "Paging/Intercom Group Settings" to edit Alert-Info Header. This header will be included in the
SIP INVITE message sent to the callee in paging/intercom call.

The UCM6200 has pre-configured paging/intercom feature code. By default, the Paging Prefix is *81
and the Intercom Prefix is *80. To edit page/intercom feature code, click on "Feature Codes" in the
"Paging/Intercom Group Settings" dialog. Or users could go to Web GUI->PBX->Internal Options-
>Feature Codes directly.

Figure 133: Page/Intercom Group Settings

UMC6200 Series User Manual
P a g e | 202