Key Lock Functions (Fx-301B/G/H Only) - Sunx FX-301 Operation Manual

11
Others
11-1. Key Lock Function [available only in the FX-301B/G/H (Blue, Green and Infrared LED types)]
The 'key lock function' prevents operators from changing the sensor settings by mistake.
Lock engaged
Lock disengaged
Keep the Jog switch and
the MODE key pressed
for 2 sec. or more at the
same time.
Keep the Jog switch and
the MODE key pressed
for 2 sec. or more at the
same time.
56
1 Keep the [MODE key] and the [Jog switch] pressed for 2sec.
or more at the same time in 'RUN mode' condition.
2'
' will be displayed, and the key lock function will be set
to ON.
3Key operations will be locked. Only the threshold value
confirmation function or the adjust function(valid only when
the adjust lock function is disengaged. Refer to p.51) is valid.
If the key lock is engaged while the adjustment lock is
disengaged (refer to p.51), it will only be possible to change
the threshold value.
4To disengage the lock function, keep the [MODE key] and the
[Jog switch] pressed for 2sec. or more at the same time once
again.
5'
' will be displayed, and the key lock function will be
set to OFF.
*The threshold value confirmation function is a function for
confirming the threshold value when the key lock is
engaged. You can display the threshold value by moving the
[Jog switch] to the ' ' or '
cannot be changed at this time.)
In addition, the normal display reappears when you release
the [Jog switch]
' side. (The threshold value