Code Setting Function - Sunx FX-301 Operation Manual

Pro mode digital fiber sensor
Hide thumbs Also See for FX-301:
Table of Contents

Advertisement

9-2. Code Setting Function

The input of a 4-digit code allows the configuration to be set directly, without the need to set each individual
function.
Press the MODE key
5 times.
Move the Jog switch toward the
'
' direction 5 times.
Press the Jog switch.
Press the Jog switch.
Press the Jog switch.
Press the
Jog switch.
Select the desired
code by moving
the Jog switch.
Select the desired
code by moving
the Jog switch.
repeat this motion
(
3 times.
The digital display will quickly blink
3 times to verify confirm the setting.
The digital display will blink twice to confirm the setting.
Press the MODE key
3 times or keep it
pressed for 2 sec. or more.
Only if settings items
other than the 'Code
Setting Table' of
p.47 to p.48 have
been changed from
their factory settings.
)
Confirm the selection
by pressing the Jog
switch.
ex.) Setting of Code 3013
Response time
: LONG
Hysterisis
: standard
L-ON/D-ON
: L-ON
Display
: Incident
light
intensity
Adjust lock
: ON
Timer operation : OFF-delay
Timer setting
: 5 ms
48
*Refer to p.47 to
'Code Setting Table'.
1 Press the [MODE key] 5 times to select 'PRO mode'.
2 Move the [Jog switch] toward the '
select 'PRO5 mode'.
3 Press the [Jog switch] to enter the 'code setting' state.
4 If the [Jog switch] is pressed, the current setting will be
displayed.
* The factory setting is '
5 Input the 4-digit of the 'code' by pressing the [Jog switch].
Please refer to the 'Code Setting Table' on p.47 to p.48, for
information on inputting codes.
6Repeat the following motions: select the digits by moving the
[Jog switch], then confirm each selection by pressing the
[Jog switch].
Once 4-digit have been input, the digital display will quickly
blink 3 times, confirming the 'code' setting.
7 If the [Jog switch] is pressed, the digital display will blink
twice to confirm that the code has been accepted.
8 Press the [MODE key] 3 times or keep it pressed for 2 sec.
or more to return to 'RUN mode' (normal sensing operation).
49
' direction 5 times, to
'.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fx-303Fx-302

Table of Contents