Hysteresis Function - Sunx FX-301 Operation Manual

5-5. Hysteresis Function

This function selects the hysteresis from among three different levels (small / standard / large).
H-01
(small)
Select the desired hysteresis
by moving the Jog switch.
The digital display will quickly
blink 3 times to confirm the setting.
Press the MODE
key 5 times.
Move the Jog switch
once, toward
the ' ' direction.
Press the
Jog switch.
Move the Jog switch toward
the ' ' direction twice.
Press the
Jog switch.
H-02 H-03
(standard) (large)
Press the
Jog switch.
Press the MODE key 3
times or keep it pressed
for 2 sec. or more.
1Press the [MODE key] 5 times to select 'PRO mode'.
2 Move the [Jog switch] once toward the '
to select 'PRO1 mode'.
3 Press the [Jog switch] to enter the 'response time change' state.
4 Move the [Jog switch] toward the '
to enter the 'hysteresis setting' state.
5 If the [Jog switch] is pressed, the current
'hysteresis' level will be displayed.
* The factory setting is H-02 (standard).
6 If the [Jog switch] is moved, the digital display will blink.
Select the desired 'hysteresis' level.
7If the [Jog switch] is pressed, the digital display will quickly
blink 3 times, confirming the 'hysteresis' setting.
8 Press the [MODE key] 3 times or keep it pressed
for 2 sec. or more to return to 'RUN mode'
(normal sensing operation).
27
' direction,
' direction twice,