Response Time Change Function - Sunx FX-301 Operation Manual

5-2. Response Time Change Function

Response time can be switched among
four levels:
FAST (high-speed) / S-D (reduced
intensity) / STD (standard) /
LONG (long-range).
FX-303 has only a single response time
of 90 !s.
*FX-301B/G/H (Blue,Green and Infrared LED
types) cannot set S-D (reduced intensity).
FX-301 , FX-302
FAST S-D
reduced
(high-speed) (
intensity
Select the desired response
time by moving the Jog switch.
FX-303
Normal
(standard)
Select the desired response
time by moving the Jog switch.
The digital display will quickly
blink 3 times to confirm the setting.
(high-speed)
(reduced intensity)
(standard)
(long-range)
Setting
Press the MODE
key 5 times.
Move the Jog switch
once, toward
the ' ' direction.
Press the Jog switch.
Press the Jog switch.
STD LONG
) (long- range)
(standard)
The light amount The light amount
is approx. 50 % is approx. 80 %
of standard of standard
Press the Jog switch.
Press the MODE key 3
times or keep it pressed
for 2 sec. or more.
Setting FX-301 Respomse time
150!s (0.15 ms) or less
250!s (0.25 ms) or less
2 ms or less
FX-303 Respomse time
90!s (0.09 ms) or less
1 Press the [MODE key] 5 times to select 'PRO mode'.
2 Move the [Jog switch] once toward the '
to select 'PRO1 mode'.
3 Press the [Jog switch] to enter the 'response
time change' state.
4 If the [Jog switch] is pressed, the current response
time will be displayed.
* FX-301 , FX-302: The factory setting is STD (standard).
FX-303: The factory setting is H-SP (standard).
5 If the [Jog switch] is moved, the digital display will blink.
Select the desired response time.
6 If the [Jog switch] is pressed, the digital display will
quickly blink 3 times, confirming the setting.
7 Press the [MODE key] 3 times or keep it pressed
for 2 sec. or more to return to 'RUN mode'
(normal sensing operation).
24
FX-302 Respomse time
300!s (0.3 ms) or less
500!s (0.5 ms) or less
4 ms or less
' direction,