0-Adjust Setting Function - Sunx FX-301 Operation Manual

9-3. 0-Adjust Setting Function

This function allows for automatic zeroing of the incident light intensity.
The digital display will quickly blink 3 times.
The digital display will quickly blink 3 times to confirm the zero adjustment.
Press the MODE key
5 times.
Move the Jog switch toward the
' ' direction 5 times.
Press the Jog switch.
Move the Jog switch once,
toward the ' ' direction.
Press the Jog switch.
Move the Jog
switch.
Press the Jog
switch.
Press the Jog switch to zero
the incident light intensity.
Press the MODE key
3 times or keep it
pressed for 2 sec. or more.
1 Press the [MODE key] 5 times to select 'PRO mode'.
2 Move the [Jog switch] toward the '
select 'PRO5 mode'.
3 Press the [Jog switch] to enter the 'code setting' state.
4 Move the [Jog switch] once toward the '
enter the '0-Adjust setting' state.
5 If the [Jog switch] is pressed, the current setting will be
displayed.
* The factory setting is '
6 If the [Jog switch] is moved, the digital display will blink.
• When setting zero adjustment
n Select 'SET', then press the [Jog switch].
• When not performing zero adjustment or when canceling a
'0-Adjust setting' that has already been set
n Select 'OFF', then press the [Jog switch].
7 When zero adjustment has been completed
n The current incident light intensity will be displayed.
When zero adjustment has not been completed or has been
cancelled
n The unit will return to the '0-Adjust setting' state.
8 If the [Jog switch] is pressed to set the desired incident light
intensity to '0', the digital display will quickly blink 3 times, to
confirm the zero adjustment.
Note: When zero adjustment is performed with the digital
display showing the 2,000 digits or greater, –1,999
digits or less will not be displayed.
9 Press the [MODE key] 3 times or keep it pressed for 2 sec.
or more to return to 'RUN mode' (normal sensing operation).
50
' direction 5 times, to
' direction, to
'.