Remote Data Bank Load Setting Function - Sunx FX-301 Operation Manual

8-3. Remote Data Bank Load Setting Function (FX-303 does not incorporate this function.)
By utilizing optical communications, the existing settings within the data banks of connected amplifiers can be
loaded in a single step. However, in FX-301B/G/H(Blue, Green and Infrared LED types) or FX-302 units in which
the optical communications settings change function has been locked, channel data will not be loaded.
Please refer to p.41 The optical communications function
Move the Jog switch to select the
desired channel for loading.
Channel 1
Displayed on
amplifiers on which
communication is
being done.
The digital display will blink
twice to confirm the setting.
Press the MODE key
5 times.
Move the Jog switch
toward the ' ' direction
4 times.
Press the Jog switch.
Move the Jog switch
once, toward the
' ' direction.
Press the Jog switch.
Channel 2 Channel 3
Press the Jog switch.
Select from YES/NO
by moving the Jog switch.
Press the
Jog switch.
The digital display
will scroll (twice).
FX-301B/G/H:
Channel for
saving will be
displayed.
Press the MODE key
3 times or keep it
pressed for 2 sec. or
more.
for the direction of optical communication.
1 Press the [MODE key] 5 times to select 'PRO mode'.
2 Move the [Jog switch] toward the '
select 'PRO4 mode'.
3 Press the [Jog switch] to enter the 'setting condition copy
setting' state.
4 Move the [Jog switch] once toward the '
enter the 'remote data bank load setting' state.
5 If the [Jog switch] is pressed, the digital display will blink.
6 Move the [Jog switch] to select the desired 'channel' for
loading, in a single step.
7 If the [Jog switch] is pressed, the letters '
8 If the [Jog switch] is moved, '
alternately displayed.
9If the [Jog switch] is pressed while '
digital display will scroll (twice) and the settings information
will be loaded in a single step. Then '
confirming the setting.
However, for amplifiers (FX-301B/G/H or FX-302) in
which the optical communications settings change
function has been locked, '
If the [Jog switch] is pressed while '
display will return to the 'remote data bank load setting'
state.
0 Press the [MODE key] 3 times or keep it pressed for 2 sec.
or more to return to 'RUN mode' (normal sensing operation).
43
' direction 4 times, to
' direction, to
' will blink.
' and ' ' will be
' is blinking, the
' will blink twice,
' will blink twice.
' is blinking, the digital