Table of Contents
Advertisement
1
Functional Description
1-1. Functional Description
1
Operation indicator (Orange)
2
Stability indicator (Green)
1
Operation indicator (Orange) ... Lights up when output is ON.
2
Stability indicator (Green)
3
MODE indicator
4
Jog switch
5
MODE key
1-2. Setting Procedure
The use [MODE key] and [Jog switch] are utilized to configure various settings.
1
Press the [MODE key]
(mode selection/cancellation)
Cancel: If the [MODE key] is pressed, the unit will return to the previous settings status, immediately before the [Jog switch] was pressed.
Selection and confirmation of settings are performed according to the order of the numbers, as shown on the amplifier: 1, 2 and 3.
3
MODE indicator
,
and
... Lights up when the incident light intensity is great enough for stable operation.
... RUN (Green)
Lights up during normal sensing operation.
TEACH (Yellow)
When this indicator lights up, the 'threshold value' for the FX-301 (Red LED
type) and FX-303 can be set by utilizing either '2-level teaching' or 'limit
teaching'. The 'threshold value' for the FX-301B/G/H (Blue, Green and
Infrared LED types) can be set by utilizing either '2-level teaching', 'limit
teaching' or 'full-auto teaching'. When the FX-302 is in window comparator
mode, the 'threshold value' can be set by either '1-level teaching', '2-level
teaching' or '3-level teaching' whenever this indicator lights up.
ADJ (Yellow)
:
When this indicator lights up, fine adjustment of the 'threshold value'
can be performed.
L/D ON (Yellow) :
When this indicator lights up, the output operation setting can be done.
TIMER (Yellow) :
When this indicator lights up, timer operation can be configured.
PRO (Yellow)
:
When this indicator lights up, further advanced functions, such as the
copying and memory functions, can be set.
... Moving this switch in the '
selection and pressing the switch then confirms the selected setting.
... This key is used to select operating modes and to cancel settings during the configuration process.
2
Move the [Jog switch] in the ' ' or ' ' direction
(chooses setting for selection)
4
Jog switch
5
are in the correct order for selecting settings.
' or '
' direction, allows different items to be viewed for
3
1
MODE key
Press the [Jog switch]
(confirms the selected setting)
Hide quick links:
Advertisement
Table of Contents
