Eco Mode Setting Function (Fx-302) - Sunx FX-301 Operation Manual

6-5. ECO Mode Setting Function (FX-302)

This function turns off the digital display and MODE indicator to reduce power consumption. If no operations are performed for
20 sec., the letters ' ' will blink and then when set to ECO1, the digital display will turn off and when set to ECO2, the
digital display and the MODE indicator will turn off.
If the [MODE key] or the [Jog switch] are operated, the digital display will light up again.
When set to ECO OFF
ECO
OFF
Select the desired display setting
by moving the Jog switch.
The digital display will quickly
blink 3 times to confirm the setting.
When ECO1
or ECO2
ECO1
Operating either the MODE key or the Jog switch causes the display to light up again.
When set to ECO1
Press the MODE
key 5 times.
Move the Jog switch toward
the ' ' direction twice.
Press the
Jog switch.
Move the Jog switch toward
the ' ' direction twice.
Press the
Jog switch.
ECO1 ECO2
Press the
Jog switch.
Press the MODE key 3
times or keep it pressed
for 2 sec. or more.
No operation has been
performed for 20 sec.
ECO2
When set to ECO2
When ECO mode is OFF:
40 mA or less (at 24 V supply voltage)
When ECO mode is 1 or 2:
30 mA or less (at 24 V supply voltage)
1 Press the [MODE key] 5 times to select 'PRO mode'.
2 Move the [Jog switch] toward the '
to select 'PRO2 mode'.
3 Press the [Jog switch] to enter the 'digital display setting' state.
4 Move the [Jog switch] toward the '
to enter the 'ECO mode setting' state.
5 If the [Jog switch] is pressed, the current setting
will be displayed.
* The factory setting is ECO OFF.
6 If the [Jog switch] is moved, the digital display will blink.
Select from either 'ECO1', 'ECO2' or 'ECO OFF'.
7 If the [Jog switch] is pressed, the digital display will
quickly blink 3 times, confirming the setting.
8Press the [MODE key] 3 times or keep it pressed for 2 sec.
or more to return to 'RUN mode' (normal sensing operation).
9When the unit is set to ECO1 or ECO2 and no
operations are performed for 20 sec., will the letters
' ' blink and the digital display then turn off.
0 If the [MODE key] or the [Jog switch] are operated,
the digital display will light up again.
To return the unit to the original state, select the setting ECO OFF.
37
Power Consumption
' direction twice,
' direction twice,