Pro5 Mode; Pro5 Mode Functions And Settings - Sunx FX-301 Operation Manual

9

PRO5 Mode

9-1. PRO5 Mode Functions and Settings

PRO5 mode allows the input of direct codes and the setting of the 0-adjust and adjust lock functions.
It also permits the unit to be reset (re-initialized).
Direct Code
FX-301 , FX-302 and FX-303 contain certain encoded basic configuration information that can be set by inputting a
4-digit code.
The functions that may be set using direct coding are: Response time, Hysteresis, L-ON / D-ON, Display setting,
Adjust lock setting function, Timer operation and Timer period.
[FX-301 Code Setting Table]
First digit
Direct Response
Hysteresis Check
code Time
STD H-02 (standard)
STD H-03 (large)
STD H-01 (small)
LONG H-02 (standard)
LONG H-03 (large)
LONG H-01 (small)
FAST H-02 (standard)
FAST H-03 (large)
FAST H-01 (small)
*S-D H-02 (standard)
[FX-302 Code Setting Table]
First digit
Direct Response
Hysteresis Check
code Time
STD H-02 (standard)
STD H-03 (large)
STD H-01 (small)
LONG H-02 (standard)
LONG H-03 (large)
H-01 (small)
LONG
FAST H-02 (standard)
FAST H-03 (large)
FAST H-01 (small)
S-D H-02 (standard)
S-D H-03 (large)
S-D H-01 (small)
Second digit
Direct
L-ON / D-ON Display
code
L-ON Incident light intensity
L-ON %
L-ON Peak hold
L-ON Bottom hold
D-ON Incident light intensity
D-ON %
D-ON Peak hold
D-ON Bottom hold
*S-D (reduced intensity) cannot be set for the
FX-301B/G/H (Blue, Green and Infrared LED types).
Second digit
Direct
L-ON / D-ON Display
code
L-ON Incident light intensity
L-ON %
L-ON Peak hold
L-ON Bottom hold
D-ON Incident light intensity
D-ON %
D-ON Peak hold
D-ON Bottom hold
Third digit
Direct Adjust
Check Timer operation
code lock
ON NON (without timer)
ON OFF-delay
ON-delay
ON
ON ONE-SHOT
NON (without timer)
OFF
OFF OFF-delay
OFF ON-delay
OFF ONE-SHOT
Third digit
Direct Adjust
Check Timer operation
code lock
ON NON (without timer)
OFF-delay
ON
ON ON-delay
ONE-SHOT
ON
OFF NON (without timer)
OFF OFF-delay
OFF ON-delay
OFF ONE-SHOT
ON-delay • OFF-delay
ON
ON-delay • ONE-SHOT
ON
ON-delay • OFF-delay
OFF
ON-delay • ONE-SHOT
OFF
* In the event that the timer operation for ON-delay / OFF-delay or
ON-delay / ONE-SHOT (8~b) are both set using the 3rd digit, then
the timer setting selected by the 4th digit will be common to both timer
operations.
47
Fourth digit
Direct Timer
Check Check
code period
OFF
1 ms
3 ms
5 ms
10 ms
30 ms
50 ms
100 ms
300 ms
500 ms
Fourth digit
Direct Timer
Check Check
code period
OFF
1 ms
3 ms
5 ms
10 ms
30 ms
50 ms
100 ms
300 ms
500 ms