Timer Operation Setting Mode - Sunx FX-301 Operation Manual

4-7. Timer Operation Setting Mode

This mode sets the operation of the timer.
Using factory settings, either 'Without timer' or '10ms OFF-delay' can be selected.
FX-301 , FX-303
PRO mode allows the configuration and usage of the following additional timer operations: OFF-delay, ON-delay
and ONE-SHOT.
Timer period can be selected from 0.5 ms to 500 ms.
Please refer to the section entitled '5-3 Timer Setting Function (FX-301 , FX-303)' from 'PRO1 Mode' on p.25.
FX-302
PRO mode allows the configuration and usage of the following additional timer operations: OFF-delay, ON-delay,
ONE-SHOT, ON-delay / OFF-delay, ON-delay / ONE-SHOT.
Timer period can be selected from 0.5 ms to 5 sec.
Please refer to the section entitled '5-4 Timer Setting Function (FX-302)' from 'PRO1 Mode' on p.26.
The current
timer operation
Without timer
Move the Jog switch to obtain
the desired setting.
The digital display will quickly
blink 3 times to confirm the setting.
In case of setting
OFF-delay timer
Press the
1 Press the [MODE key] 4 times to select the
MODE key
'timer operation setting mode'.
4 times.
2 The current setting will be displayed.
If the [Jog switch] is moved, the digital display will blink.
* The factory setting is Without timer.
Move the
Jog switch.
OFF-delay
3 Move the [Jog switch] to obtain the desired setting for timer
operation.
* The factory setting is Without timer / 10 ms OFF-delay.
The '10 ms OFF-delay' can be altered by utilizing the
'Timer Setting Function' from 'PRO1 Mode' on p.25~.
Press the
4 If the [Jog switch] is pressed, the digital display will quickly
Jog switch.
blink 3 times, confirming the setting of the operation of timer.
Press the [MODE key]
twice or keep it pressed
5 Press the [MODE key] twice or keep it pressed for
for 2 sec. or more.
2 sec. or more to return to 'RUN mode'
(normal sensing operation).
20