Data Bank Load Setting Function - Sunx FX-301 Operation Manual

7-2. Data Bank Load Setting Function

This function allows configuration settings information from the data bank to be selected and then loaded.
This feature allows settings to be changed quickly at times of reconfiguration, etc.
Move the Jog switch to select the
desired channel for loading.
Channel 1
The digital display will blink twice to confirm the setting.
Press the MODE
key 5 times.
Move the Jog switch toward
the ' ' direction 3 times.
Press the Jog switch.
Press the Jog switch.
Channel 2 Channel 3
Press the Jog switch.
Select from YES/NO by
moving the Jog switch.
Press the
Jog switch.
Press the MODE key 3
times or keep it pressed
for 2 sec. or more.
1 Press the [MODE key] 5 times to select 'PRO mode'.
2 Move the [Jog switch] toward the '
to select 'PRO3 mode'.
3 Press the [Jog switch] to enter the 'data bank load setting' state.
4 If the [Jog switch] is pressed, the display will blink.
5 If the [Jog switch] is moved, the 'channel' will be changed.
Select the desired 'channel' for loading.
6 If the [Jog switch] is pressed, the letters '
7 If the [Jog switch] is moved, '
will be alternately displayed.
8If the [Jog switch] is pressed while '
configuration settings will be loaded from the selected
'channel'. The digital display will blink twice to confirm the
new setting.
If the [Jog switch] is pressed while '
will return to the 'data bank load setting' state.
9 Press the [MODE key] 3 times or keep it pressed
for 2 sec. or more to return to 'RUN mode'
(normal sensing operation).
39
' direction 3 times,
' will blink.
' and ' '
' is blinking, the
' is blinking, the unit