Window Comparator Hysteresis Function - Sunx FX-301 Operation Manual

10-3. Window Comparator Hysteresis Function

When in window comparator mode, the hysteresis setting can be selected from either 'IN Hysteresis' or 'OUT Hysteresis'.
(Refer to p. 53 for more information.)
IN
Hysteresis
Move the Jog switch to select
the desired hysteresis.
The digital display will blink quickly
3 times to confirm the selection.
Press the MODE
key 5 times.
Move the Jog switch
toward the ' ' direction
6 times.
Press the
Jog switch.
Move the Jog switch
toward the ' ' direction
once.
Press the
Jog switch.
OUT
Hysteresis
Press the
Jog switch.
Press the MODE key
3 times or keep it pressed
for 2 sec. or more.
1 Press the [MODE key] 5 times to select 'PRO mode'.
2 Move the [Jog switch] toward the '
select 'PRO mode'.
3 Press the [Jog switch] to enter the 'window comparator mode
setting' state.
4 Move the [Jog switch] toward the '
the 'window comparator hysteresis setting' state.
5 If the [Jog switch] is pressed, the current hysteresis setting
will be displayed.
* The factory setting is 'IN Hysteresis'.
6 If the [Jog switch] is moved, the digital display will start blinking.
Select the desired 'hysteresis setting'.
7 If the [Jog switch] is pressed, the digital display will blink
quickly 3 times and the 'hysteresis' will be set.
8 Press the MODE key 3 times or keep it pressed for 2 sec. or
more to return to 'RUN mode' (normal sensing operation).
55
' direction 6 times to
' direction once to enter