Communication Condition Confirmation Function - Sunx FX-301 Operation Manual

8-5. Communication Condition Confirmation Function (FX-303 does not incorporate this function.)
This function verifies whether optical communications have been properly established between connected
amplifiers.
Please refer to p.41 The optical communications function
Also displayed on
amplifiers on which
copy is done
The digital display will blink twice to confirm the setting.
Press the MODE key
5 times.
Move the Jog switch
toward the ' ' direction
4 times.
Press the Jog switch.
Move the Jog switch
toward the ' ' direction
3 times.
Press the Jog switch.
Select from YES/NO
by moving the Jog switch.
Press the
Jog switch.
The digital display
will scroll (twice).
* The sub units will display
'2ch', '3ch' .
Press the MODE key 3
times or keep it pressed
for 2 sec. or more.
for the direction of optical communication.
1 Press the [MODE key] 5 times to select 'PRO mode'.
2 Move the [Jog switch] toward the
select 'PRO4 mode'.
3 Press the [Jog switch] to enter the 'setting condition copy
setting' state.
4 Move the [Jog switch] toward the
enter the 'communication condition confirmation setting'
state.
5 If the [Jog switch] is pressed, the letters '
displayed.
6 If the [Jog switch] is moved, '
alternately displayed.
7 If the [Jog switch] is pressed while '
digital display will scroll (twice) and the communication
condition will be confirmed. Then '
confirming the setting.
If the [Jog switch] is pressed while '
display will return to the 'communication condition
confirmation setting' state.
The channel displays will appear consecutively even if
FX-301 , and FX-302 units are being used together.
If the FX-301B/G/H or FX-302 have been set so that
changing the communication settings is not permitted, the
communication conditions cannot be checked. ('
displayed.)
8 Press the [MODE key] 3 times or keep it pressed for 2 sec.
or more to return to 'RUN mode' (normal sensing operation).
45
direction 4 times, to
' '
' ' direction 3 times, to
' will be
' and ' ' will be
' is blinking, the
' will blink twice,
' is blinking, the digital
' is