Eco Mode Setting Function (Fx-301 , Fx-303) - Sunx FX-301 Operation Manual

6-4. ECO Mode Setting Function (FX-301 , FX-303)

This function turns off the digital display to reduce power consumption.
If no operations are performed for 20 sec., the letters '
If the [MODE key] or the [Jog switch] are operated, the digital display will light up again.
When set to ECO OFF
ECO
OFF
Select between ON/OFF
by moving the Jog switch.
The digital display will quickly
blink 3 times to confirm the setting.
Only when
ECO ON
When set to ECO ON
Press the MODE
key 5 times.
Move the Jog switch toward
the ' ' direction twice.
Press the
Jog switch.
Move the Jog switch toward
the ' ' direction twice.
Press the
Jog switch.
ECO
ON
Press the
Jog switch.
Press the MODE key 3
times or keep it pressed
for 2 sec. or more.
No operation has been
performed for 20 sec.
' will blink and then the digital display will turn off.
FX-301(Red LED type),
FX-301H(Infared LED type), FX-303
When ECO mode is OFF:
40 mA or less (at 24 V supply voltage)
When ECO mode is ON:
25 mA or less (at 24 V supply voltage)
FX-301B/G(Blue and Green LED types)
When ECO mode is OFF:
30 mA or less (at 24 V supply voltage)
When ECO mode is ON:
18 mA or less (at 24 V supply voltage)
1 Press the [MODE key] 5 times to select 'PRO mode'.
2 Move the [Jog switch] toward the '
to select 'PRO2 mode'.
3 Press the [Jog switch] to enter the 'digital display setting' state.
4 Move the [Jog switch] toward the '
to enter the 'ECO mode setting' state.
5 If the [Jog switch] is pressed, the current setting
will be displayed.
* The factory setting is ECO OFF.
6 If the [Jog switch] is moved, the digital display will blink.
Select from either 'ECO ON' or 'ECO OFF'.
7 If the [Jog switch] is pressed, the digital display will
quickly blink 3 times, confirming the setting.
8Press the [MODE key] 3 times or keep it
pressed for 2 sec. or more to return to
'RUN mode' (normal sensing operation).
35
Power Consumption
' direction twice,
' direction twice,