Digital Display Setting Function - Sunx FX-301 Operation Manual

6-2. Digital Display Setting Function

This function allows the display to be switched among the different digital displays
(incident light intensity display, percentage display, peak hold display, bottom hold display)
However, when FX-302 is in window comparator mode, the percentage display function cannot be utilized.
Incident light Percentage
intensity display display
Select the desired display setting
by moving the Jog switch.
The digital display will quickly
blink 3 times to confirm the setting.
Press the MODE
key 5 times.
Move the Jog switch toward
the ' ' direction twice.
Press the Jog switch.
Press the Jog switch.
Peak hold Bottom hold
display display
Press the Jog switch.
Press the MODE key
3 times or keep it
pressed for 2 sec. or
more.
33
1 Press the [MODE key] 5 times to select 'PRO mode'.
2 Move the [Jog switch] toward the '
to select 'PRO2 mode'.
3 Press the [Jog switch] to enter the 'digital display setting' state.
4 If the [Jog switch] is pressed, the current
'display setting' will be displayed.
* The factory setting is incident light intensity display.
5 If the [Jog switch] is moved, the digital display will blink.
Select the desired 'display setting'.
However, when the FX-302 is in window comparator mode,
the percentage display function cannot be utilized.
6 If the [Jog switch] is pressed, the digital display will quickly
blink 3 times, confirming the 'display setting' selection.
7 Press the [MODE key] 3 times or keep it pressed
for 2 sec. or more to return to 'RUN mode'
(normal sensing operation).
' direction twice,